Raydium

Note

This connector has been upgraded to the Gateway New (v2.5+) standard and available in the current development branch. For installation instructions, refer to the Installation & Setup page.

🛠 Connector Info¶

Chain: Solana
Available Networks: mainnet-beta, devnet

Connectors	Route Schemas	Notes
`raydium/clmm`	Swap, CLMM	Supports Raydium Concentrated pools
`raydium/amm`	Swap, AMM	Supports Raydium Standard AMM and CPMM pools

See Route Schemas for more information about the endpoints defined by each connector.

ℹ️ Exchange Info¶

Website: https://raydium.io
DefiLlama: https://defillama.com/protocol/raydium
DEXScreener: https://dexscreener.com/solana/raydium
GeckoTerminal: https://www.geckoterminal.com/solana/raydium/pools
SDK Docs: https://github.com/raydium-io/raydium-sdk-V2

🔑 How to Connect¶

Warning

This connection interface is likely to change in future releases as we continue to improve the Gateway architecture.

From inside the Hummingbot client, run gateway connect raydium/clmm or gateway connect raydium/amm:

Which Solana network do you want raydium/clmm to connect to? (mainnet-beta) >>> mainnet-beta
Enter your solana_mainnet-beta private key >>>>

If connection is successful:

The raydium/clmm connector now uses wallet [pubKey] on solana-mainnet-beta

⚙️ Connector Configs¶

Connector Folder: /gateway/src/connectors/raydium
Config Schema: /gateway/src/services/schema/raydium-schema.json

Upon Gateway setup, a default raydium.yml configuration file matching the schema is created in your conf folder based on the template below:

# AMM (Automated Market Maker) settings
amm:
  allowedSlippage: '1/100'  # 1% maximum price movement
  pools:
    RAY-SOL: 'AVs9TA4nWDzfPJE9gGVNJMVhcQy3V9PGazuz33BfG2RA'
    SOL-USDC: '58oQChx4yWmvKdwLLZzBi4ChoCc2fqCUWBkwMihLYQo2'
    RAY-USDC: '6UmmUiYoBjSrhakAobJw8BvkmJtDVxaeBtbt7rxWo1mg'
    WIF-SOL: 'EP2ib6dYdEeqD8MfE2ezHCxX3kP3K2eLKkirfPm5eyMx'
    POPCAT-SOL: 'FRhB8L7Y9Qq41qZXYLtC2nw8An1RJfLLxRF2x9RwLLMo'
    SOL-TRUMP: 'HKuJrP5tYQLbEUdjKwjgnHs2957QKjR2iWhJKTtMa1xs'
    LAYER-USDC: 'G6drsaPCR3pxsEmSTAc81kW1EL3kFAFwtSAkzUZXmgH3'

# CLMM (Concentrated Liquidity) settings
clmm:
  allowedSlippage: '1/100'  # 1% maximum price movement
  pools:
    SOL-USDC: '3ucNos4NbumPLZNWztqGHNFFgkHeRMBQAVemeeomsUxv'
    RAY-USDC: '61R1ndXxvsWXXkWSyNkCxnzwd3zUNB8Q2ibmkiLPC8ht'
    SOL-USDT: '3nMFwZXwY1s1M5s8vYAHqd4wGs4iSxXE4LRoUMMYqEgF'
    SOL-RAY: '2AXXcN6oN9bBT5owwmTH53C7QHUXvhLeu718Kqt8rvY2'
    USDC-USDT: 'BZtgQEyS6eXUXicYPHecYQ7PybqodXQMvkjUbP4R8mUU'
    SOL-JITOSOL: '2uoKbPEidR7KAMYtY4x7xdkHXWqYib5k4CutJauSL3Mc'
    SOL-TRUMP: 'GQsPr4RJk9AZkkfWHud7v4MtotcxhaYzZHdsPCg9vNvW'
    LAYER-USDC: 'G6drsaPCR3pxsEmSTAc81kW1EL3kFAFwtSAkzUZXmgH3'
    TRUMP-USDC: '7XzVsjqTebULfkUofTDH5gDdZDmxacPmPuTfHa1n9kuh'

Slippage¶

Defines the price slippage allowed when quoting and executing a swap
allowedSlippage: '1/100' means 1% price movement allowed

Pool Addresses¶

These addresses are required for Hummingbot strategies to interact with the correct pools when trading on AMM and CLMM exchanges
Add your frequently used pairs to the configuration for easy access in strategies
Format: TOKEN1-TOKEN2: 'pool_address'
Example: SOL-USDC: '3ucNos4NbumPLZNWztqGHNFFgkHeRMBQAVemeeomsUxv'